CAMCUDA ThermoCore IP 256 Radiometric Ethernet Thermal Camera Module

Radiometric Ethernet

256 × 192 radiometric LWIR module with RJ45 Ethernet, 12 μm pixels and 0.7 W typical power consumption.

Configuration review

Request a project quotation

Share the quantity, destination and integration requirements for a reviewed quotation.

Selected configuration
Project quotation

Configuration review required

Available by quotation. Configuration, supplied items and lead time are confirmed for your project.

Request a QuoteDiscuss integration requirements
SKU: CC-TC-IP-256 Category:

TECHNICAL RESOURCES

Product documents

Description

CAMCUDA ThermoCore IP 256

Networked thermal imaging. Point, line and area analysis.

Integrate radiometric thermal imaging into industrial monitoring, inspection robots and fixed monitoring systems. Ethernet carries video and integration data; RS232/RS485 provides serial connectivity.

Native resolution256 × 192
Thermal sensitivity≤50 mK @ f/1.0, 300 K
Network integrationRJ45 · HTTP · ONVIF
Temperature analysisPoint · line · area

Technical specifications

Thermal detector Uncooled VOx
Native thermal resolution 256 × 192
Pixel pitch 12 μm
Spectral response 8–14 μm
NETD ≤50 mK @ f/1.0, 300 K
Video compression H.264
Main encoded stream 720 × 576 @ 25 fps
Measurement ranges −20°C to 150°C / 0°C to 550°C
Temperature analysis Point / line / area
Network interface RJ45 Ethernet
Serial interfaces RS232 / RS485
Alarm I/O 1 input / 1 output
Integration Windows / Linux SDK; HTTP / ONVIF
Input supply 9–14 V DC
Typical power consumption 0.7 W
Dimensions, excluding lens 35 × 35 × 35.5 mm
Weight, excluding lens 55.5 g
Measurement accuracy ±2°C or ±2% of reading, whichever is greater (ambient −20°C to 60°C)
Operating temperature −30°C to 60°C
Storage temperature −45°C to 75°C
Relative humidity ≤95%
Image processing Non-uniformity correction; gain control; detail enhancement; 3D noise reduction
Image palettes White hot / black hot / iron red / red hot / rainbow

Lens selection and supplied accessories are confirmed in your quotation.

Integration applications

Industrial monitoring

Temperature analysis for equipment and process monitoring.

Inspection systems

OEM integration into inspection robots and fixed observation systems.

Networked monitoring

Ethernet-based video and temperature analysis for monitoring platforms.

Frequently asked questions

Does the encoded video size change the detector resolution?

No. The native thermal detector is 256 × 192. The encoded stream size is listed separately in the specifications.

Which temperature ranges are supported?

The measurement ranges are −20°C to 150°C and 0°C to 550°C. Point, line and area analysis are supported.

How can this module connect to a monitoring platform?

RJ45 Ethernet, HTTP and ONVIF are supported, with SDK support for Windows and Linux. RS232/RS485 interfaces are also available.

How do I request a quotation?

Send the required lens, quantity, destination and integration requirements. CAMCUDA will confirm the configuration and supply terms before an order is accepted.

What power supply does the module require?

The specified supply is 9–14 V DC. Confirm the wiring and integration configuration before powering the module.

Where can I find the technical specifications?

Download the English integration datasheet from Product documents on this page. Contact CAMCUDA for project-specific integration requirements.

Additional information

Weight 0.5 kg
Native thermal resolution

256 × 192

Video interface

RJ45 Ethernet

OEM inquiryProject quotation
Quote